Goods lift GL2 1811T2

inc. vat 60.395,11 EUR ex. vat 48.316,09 EUR
The price of this product is a pricing example. Please contact us for a price on your project.

Goods lift from the GL series.

The GL series consists of a variety of standard product elevators. Together, the series covers the need for most tasks where goods are to be transported between two floors. The solution is built around a scissors lift table. The lift table is located in a shaft that shields the lift on all sides. The shaft can consist of existing building parts, or of light walls built up to the lift. At each level there is a door or gate with approved door locks. The lift is called or sent to the desired level. At each level there are light indicators for the movement and position of the lift.

The goods elevator from JEMA LIFT is produced in our factory in Denmark. We even produce the lift, therefore we are also flexible and can produce in other sizes and capabilities if desired. Of course, we are also ready to provide an offer on a good-selling elevator to be adapted to existing conditions where the standard solution cannot be used. This series is calculated exclusively for goods transport. Personal transport is not allowed.

Technical specifications:

Type no.
GL2 1811T2
Capacity -  evenly distributed load 2000 kg
Charge size 1800 x 1100 mm
Built-in height
700 mm
Pit size (LXWXD) 1830 x 1130 x 730 mm
Lift stroke
3000 mm

Also made on special dimensions - Contact us

Included in the price of standard goods lift:

  • Scissor lifting table
  • Non -slip surface - aluminum door plate
  • Elevator control - 2 floors
  • 2 x approved door locks
  • Mechanical fuse in top position
  • Operation
  • Light indicator for lift in motion/position
  • Door to bottom level (not climate screen)
  • Door to top level

Shielding:

Door and door are both manual and single hinged. If further shielding is required, we can also offer it.

Pit:

This solution requires a pit. The size of the pit depends on which model you choose. Pit drawings can be handed out after order.

Inspection:

The goods elevator must have a minimum of 2 annual statutory inspection. We offer a fixed price for the first inspection, and we will then perform inspection at a price calculated based on our first visit.

Delivery and assembly of goods lift:

The goods lift can be ordered with and without delivery and assembly. Before mounting, the site must be ready for start-up.

In order for the mounting site to be reported, the following conditions must be clarified or performed:

  • Load tubes for wires and hydraulic hose must be established to the pit.
  • Placing pump station and control must be designated.
  • Grube must be emptied of any waste, building materials and water.
  • Cottage around pit must be completed.
  • Power with switch must be led to location for the control.
  • Possibility to pull wires for operations and door locks must be present.
  • Any aids in connection with placement of lifting table in pit must be present.
  • If there is a need for crane, truck or other aids to mount the product elevator, this will be settled separately.
Download brugermanualen her: Brugermanual.pdf
Download the user manual here: User manual.pdf
Laden Sie hier das Benutzerhandbuch herunter: Benutzerhandbuch.pdf

You may also like