Car lift for 2500 kg

inc. vat 136.694,28 EUR ex. vat 109.355,42 EUR
Prisen på dette produkt er et priseksempel. Kontakt os for en pris på jeres projekt.

Betal via
faktura

Over 40 års
erfaring

Speciallavede
løsninger

A car lift can be used as transport for cars between different floors.

The transport of cars between several floors can be handled by a car lift that is built up exactly as a product elevator - but just designed, so it works optimally for moving cars between levels in a car house.

A car lift is built around a scissors lift table. The lift table is located in a shaft that shields the car lift on all sides. The shaft can consist of existing building parts, or of light walls built up for the billift. At each level there is a door or gate with approved door locks. The lift is called or sent to the desired level. At each level there are light indicators for the movement and position of the lift.

The car elevator from JEMA LIFT is produced in our factory in Denmark. We even produce the lift, therefore we are also flexible and can produce in other sizes and capabilities if desired. Our car elevators are calculated exclusively for goods transport. Personal transport is not allowed.

Technical specifications:

Type
S-64703470T2,5
Lift time Ca. 100 sec
Capacity - evenly distributed cargo 2500 kg
Length 6470 mm
Width 3470 mm
Lift stroke
4000 mm
Min. height
900 mm
Max. height
4900 mm
Engine 7.5 kW.
Use Max. 80 lift per. 24 hours at 3000 kg


Also made on custom measures - Contact us


Included in the price of car elevator:

  • Scissor table
  • Non-slip surface - aluminum door plate
  • Elevator control - 2 floors
  • 2 x approved door locks
  • Mechanical fuse in top position
  • Operation
  • Light indicator of lift in motion / position
  • Door to bottom level (not climate screen)
  • Door to upper level

Technical description:

Profile steel steel gives the lifting table a very large side stability. Long bushings with grease nipples in all moving joints reduce the load in the most exposed places and ensure a long life with minimal maintenance. Rolls and wheels are forkeletter, providing a very long life and very low maintenance costs.

Foreclosure:

Door and door are both manual and single hinge. If additional shielding is required, we can also offer it.

Pit:

This solution requires a pit. The size of the pit depends on which model you choose. Grubs can be handed over by offer or order.

Basis of CE marking:

The lift table meets all applicable circulars and regulations. It is delivered tested and CE marked according to the machine directive and standard DS EN 1570 incl. Documentation and test certificate.

Guarantee:

The 1 year warranty from JEMA LIFT is granted on errors and defects due to the lift's construction and setup. The warranty period requires Max. 8 hours of use / days.

Inspection:

The car elevator must have a minimum of 2 annual statutory inspection. We offer a fixed price for the first inspection, and we will then carry out inspection to a price calculated from our first visit.

Delivery and assembly of product elevator:

The price is including delivery and assembly.

In order for the mounting site to be reported, the following conditions must be clarified or performed:

  • Load tubes for wires and hydraulic hose must be established to the pit.
  • Placing pump station and control must be designated.
  • The pit must be emptied of any waste, building materials and water.
  • Cottage around pit must be completed.
  • Power with switch must be led to location for the control.
  • Possibility to pull wires for operations and door locks must be present.
  • Any aids in connection with placement of lifting table in pit must be present.
  • If there is a need for crane, truck or other aids to mount the car lift, this will be settled separately.

Du vil muligvis også synes om