Goods lift to 1000 kg

inc. vat 54.830,67 EUR ex. vat 43.864,54 EUR
Prisen på dette produkt er et priseksempel. Kontakt os for en pris på jeres projekt.

Betal via

Over 40 års


Goods lift with a lifting capacity of 1000 kg to transport goods between two floors.

The goods lift from JEMA LIFT is produced at our factory in Denmark. We produce the lift ourselves, so we are also flexible and can produce in other sizes and capabilities if desired. Of course, we are also prepared to offer an offer on a product elevator that must be adapted to existing conditions where the standard solution cannot be used.

Technical specifications:

Scissor type
Lifting time 0.05 m/sec
Capacity - evenly distributed load 1000 kg
Length 1700 mm
Width 1000 mm
Lift stroke
3200 mm
Min. height
85 mm
Operator Operator allowed together with goods
Person transport No
Use Max. 40 lifting per 24 hours at 1000 kg

Also made on special dimensions - Contact us

Technical description:

Profile steel arms in high -strength steel give the lifting table a very large side stability. Long bushings with lubrication nipples in all moving joints reduce the load in the most exposed places and ensure the lifting table a long life with minimal maintenance. Rolls and wheels are fork assembled, providing a very long life and very low maintenance costs.

Basis of CE Marking:

The goods elevator meets all applicable circulars and regulations. It is supplied tested and CE marked according to the Machinery Directive and Standard DS EN 1570 incl. Documentation and test certificate


A 1 year warranty is provided from Jema Lift on errors and deficiencies, which are due to the lift's construction and setup. The warranty period requires max. 8 hours of use / day. Or max 80 lifting per day.


This solution requires a pit. GRUG CALCULATIONS can be handed out by offer or order.


The goods elevator must have a minimum of 2 annual statutory inspection. We offer a fixed price for the first inspection, and we will then have inspection at a price calculated based on our first visit.


The price is incl. Delivery and assembly.

In order for the assembly site to be reported ready, the following conditions must be clarified or executed:

  • Leading pipes for wires and hydraulic hose must be established for the pit.
  • Location of pumping station and control must be designated.
  • Gravel dimensions must be complied with
  • Grube must be emptied of any waste, building materials and water.
  • Casting work around pit must be completed.
  • Power with switch must be brought forward to location for the steering.
  • Possibility of pulling wires for operations and door locks must be present.
  • Any aids related to placement of lifting table in pit must be present.
  • If a crane, truck or other aids are needed to install the goods elevator, this will be settled separately.

Du vil muligvis også synes om